Ebara FSD Series Stainless Steel Direct-Coupled Pump
A compact, SUS304 stainless steel direct-coupled pump for clear water duties indoors or outdoors, combining improved efficiency, IE3 motors and a guarded rotating shaft.
- SUS304 wetted parts
- Indoor or outdoor
- IE3 motors

Compact stainless pumping for clear water
The Ebara FSD is a single-stage end suction pump with the motor directly connected to the pump, giving a compact unit with no separate coupling. Casing, impeller and wetted shaft are all SUS304 stainless steel, suitable for clear water from 0 °C to 100 °C. Stainless wetted parts avoid rust and help keep treated or hot water clean in service.
The low-noise, totally enclosed fan-cooled motor is rated IP44 and can be installed indoors or outdoors. Motors are three-phase, 2-pole with IE3 premium efficiency. Analysis of the impeller and casing has improved pump efficiency compared with traditional designs. Supply voltage is 200 V at 50 Hz or 200/220 V at 60 Hz, so check your site supply when selecting.
A protector covers the exposed part of the rotating shaft for safer operation. Construction includes a closed impeller, mechanical seal, sealed ball bearings in the motor and flanges compliant with JIS 10K. The suction total head is -6 m at 20 °C within the selection chart range. Together these features make the FSD a tidy, low-maintenance choice for utility rooms, rooftops and equipment yards.
- SUS304 casing, impeller and wetted shaft
- Clear water from 0 °C to 100 °C
- Low-noise TEFC IP44 motor for indoor or outdoor use
- Three-phase, 2-pole IE3 premium efficiency motor
- Mechanical seal and sealed motor bearings
- Guard over exposed rotating parts
FSD technical specifications
| Handled fluid | Clear water, 0 °C to 100 °C |
|---|---|
| Suction total head | -6 m (at 20 °C, within the selection chart range) |
| Standard allowable boost pressure | As per model specification table |
| Impeller | Closed |
| Shaft seal | Mechanical seal |
| Bearings | Sealed ball bearings (in the motor) |
| Flange | JIS 10K compliant |
| Casing material | SUS304 |
| Impeller material | SUS304 |
| Shaft material | SUS304 (wetted parts) |
| Motor | Three-phase, 2-pole |
| Voltage | 200 V (50 Hz); 200/220 V (60 Hz) |
| Enclosure | Totally enclosed fan-cooled, IP44 (outdoor) |
| Motor efficiency | IE3 (premium efficiency) |
| Location | Indoor and outdoor |
Ebara products are supplied by Pumping Solutions; we are not the manufacturer.
Advantages of the FSD
Compact design
Direct connection between motor and pump keeps the unit short and light, easing installation in tight utility spaces.
Indoor or outdoor
A low-noise, fan-cooled IP44 enclosure allows installation inside plant rooms or outdoors on terraces, rooftops and equipment yards.
Stainless wetted parts
SUS304 casing, impeller and shaft resist rust, helping keep treated and hot water clean and extending the pump's service life.
Safety guard fitted
A protector over the exposed rotating shaft reduces the risk of accidental contact during operation, inspection and routine maintenance.
Where the FSD is used
Ebara FSD Series Stainless Steel — FAQs
Straight answers to the questions buyers ask us most. Can't find yours? Ask an engineer directly.
Why choose stainless steel for clear water pumping?
SUS304 wetted parts resist rust, so the pump does not discolour the water and keeps performing well over time. This typically suits treated water, hot water and food or beverage utilities where cleanliness matters. For ordinary utility water where cost is the priority, a cast iron pump may also be acceptable.
Can the FSD be installed outdoors?
Yes. The FSD uses a low-noise, totally enclosed fan-cooled motor with IP44 protection, rated for outdoor installation. For long-term outdoor use in India, a simple canopy to shield the pump from direct monsoon rain and strong sun is still recommended to protect terminal boxes and extend motor life.
What suction conditions does the FSD accept?
The FSD has a suction total head of -6 m at 20 °C within its selection chart range. Hot water reduces the available suction lift, so at higher temperatures a flooded suction is preferred. Share your tank level and pipe arrangement and we will check the suction margin.
What details are needed to select an FSD?
Please send the flow rate, total head, water temperature, suction arrangement, pipe size, supply voltage and installation location. Mention whether the pump will run continuously or intermittently, so we can confirm the right model and motor rating. If you are replacing an existing pump, a nameplate photo also helps.
Related pump models
Get the right FSD stainless pump for your water system
Share your flow, head and water temperature and we will recommend a suitable FSD model for your site.