Ebara FDP Stainless Steel Direct-Coupled End Suction Pump
For building services and hot-water circulation where clean, corrosion-free water contact matters. The FDP pairs a SUS304 pump with a quiet IE3 premium-efficiency motor.
- SUS304 casing
- Up to 100 °C
- IE3 motor

Clean, efficient pumping for hot and cold water
The Ebara FDP is a direct-coupled, single-stage stainless steel end suction pump. Wetted parts use stainless steel to suit clean-water standards, and the pump handles water up to 100 °C, making it a natural fit for hot-water supply and circulation loops. It also suits cold clear-water supply in buildings and light industrial lines.
The casing is formed from stainless sheet using Ebara's bulge-forming process for good hydraulic efficiency. Every model has a low-noise, totally enclosed fan-cooled motor rated IP44, suitable indoors and outdoors. Mounting dimensions match the cast iron FSD model, so it can replace an existing pump without changing the base. Pumping Solutions supplies the FDP across India.
- Stainless steel wetted parts, SUS304 casing
- Clear water from 0 to 100 °C
- Low-noise TEFC motor, IP44 outdoor rated
- IE3 premium-efficiency motor
- Bulge-formed casing for high efficiency
- Same mounting dimensions as cast iron FSD
FDP specifications
| Pump type | Direct-coupled single-stage end suction |
|---|---|
| Liquid | Clear water |
| Liquid temperature | 0 to 100 °C |
| Suction head | -6 m at 20 °C (within the discharge range shown in the drawing) |
| Shaft seal | Mechanical seal |
| Flange | JIS 10K type (standard) conforming |
| Casing material | SUS304 |
| Motor phase / poles | 3 phase / 2 poles |
| Voltage | 200 V (50 Hz); 200/220 V (60 Hz) |
| Motor type / protection | Totally enclosed fan cooled / IP44 (outdoor) |
| Motor efficiency | IE3 premium efficiency (Top Runner motor for 0.75 kW and above; Ebara premium-efficiency motor below 0.75 kW) |
| Safety | Exposed rotor fitted with protector |
Ebara products are supplied by Pumping Solutions; we are not the manufacturer.
Why choose the FDP
Stainless wetted parts
SUS304 casing and stainless internals avoid rust and discolouration, keeping supply water clean in buildings and process lines.
Hot water ready
Rated for water up to 100 °C, so it suits hot-water supply, boiler circulation and heating loops without special modifications.
IE3 premium motor
Premium-efficiency motors reduce running cost on pumps that operate for long hours, such as circulation and building supply duties.
Drop-in replacement
Mounting dimensions match the cast iron FSD model, so upgrading to stainless needs no new base or pipe changes.
Typical applications
Ebara FDP Stainless Steel — FAQs
Straight answers to the questions buyers ask us most. Can't find yours? Ask an engineer directly.
Why choose a stainless steel pump over cast iron?
Stainless steel does not rust, so it avoids red water and scale build-up that can occur with cast iron, especially in hot water and soft water systems. It is preferred where water quality matters, such as drinking water and hotel hot-water circuits. The FDP also shares mounting dimensions with the cast iron FSD, making the upgrade straightforward.
What does the -6 m suction head figure mean?
It indicates the pump can draw water from about 6 m below its centreline at 20 °C, within the flow range shown on the performance drawing. Hotter water has higher vapour pressure, so suction lift falls as temperature rises. For hot-water circulation, the pump should normally have a flooded suction. Share your layout and we will check it.
Can the FDP be installed outdoors?
Yes. All models use a totally enclosed fan-cooled motor with IP44 protection rated for outdoor use. For long-term outdoor installation in India, a simple canopy against direct sun and heavy rain still helps motor life, and the terminal box should be kept sealed. Low noise also makes it suitable near occupied areas.
What should I send to get the right FDP model?
Send the required flow and total head, water temperature, whether suction is flooded or lifting, the power supply available and the application, such as hot-water circulation or booster supply. Existing pump details, including make, model and motor rating, are also helpful if you are replacing a unit.
Related pump models
Choose the right stainless steel end suction pump for your system
Tell us your flow, head and water temperature and we will recommend the matching FDP model.